First open Terminal
And Type ifconfig eth0 to get in
root@bt:~# ifconfig
eth0
eth0 Link encap:Ethernet HWaddr 00:25:64:67:3b:1d
inet addr:192.168.0.33 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr:
fe80::225:64ff:fe67:3b1d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:6567 errors:0 dropped:0
overruns:0 frame:0
TX packets:567 errors:0 dropped:0
overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:553250 (553.2 KB) TX bytes:45293 (45.2 KB)
Interrupt:44 Base address:0xe000
Next we type dhclient
eth0 to see the ip
root@bt:~# dhclient
eth0
There is already a pid
file /var/run/dhclient.pid with pid 3732
killed old client
process, removed PID file
Internet Systems
Consortium DHCP Client V3.1.3
Copyright 2004-2009
Internet Systems Consortium.
All rights reserved.
For info, please visit
https://www.isc.org/software/dhcp/
Listening on
LPF/eth0/00:25:64:67:3b:1d
Sending on LPF/eth0/00:25:64:67:3b:1d
Sending on Socket/fallback
DHCPREQUEST of
192.168.0.33 on eth0 to 255.255.255.255 port 67
DHCPACK of
192.168.0.33 from 192.168.0.40
bound to 192.168.0.33
-- renewal in 259465 seconds.
Next to get in
Applikation Information Gatering, Network Analisis, Network Scanner,
Select Auto scan
then it will appear like the image below:
Click Forward
Forward
Forward
Next we see ip the active and we can determaine the ip
address which we enter,
For example I got
192.168.0.21 There is 4 options depending on where we want to go,
but I choose
via web active
0 comments:
Post a Comment